Good day to all. Need some advice or just a push in the right direction.
Got a 1600 twinport beach buggy whereby i fitted a centremount weber 36 dcd7 . Intake is not yet heated but will be shortley from a new s/s four into one exhaust. Here is the question, what would the baseline jetting be for this setup beiing at sealevel?.
Any info would be highly appresiated.
Weber 36 dcd jetting
-
- Drip
- Posts: 1
- Joined: Mon Jul 12, 2021 7:22 am
- What model do you have?: 1600 twinport Beachb
- Location: Bredasdorp
-
- Drip
- Posts: 20
- Joined: Mon Nov 05, 2012 11:24 am
- What model do you have?: 1983/944
- Location: Cape Town
- Been thanked: 1 time
Re: Weber 36 dcd jetting
Unfortunately the 36DCD7 was not fitted as original equipment to any production car according to the Haynes manual on Webers. Herewith the jetting and venturi sizes for a 1600 Capri GT and and Escort 1600.
The first number is for the primary and the second number for the secondary.
Capri 28/36 DCD 38 / mains 1.40 & 1.55 / air correction 2.30 & 1.80 / emulsion tube F30 & F30 / Aux venturi 4.5 & 4.5
Venturi 26 & 27 / idle jet 0.55 & 0.70
Escort 32 DGAV 6C / mains 1.15 & 1.20 / air correction 1.60 & 1.20 / emulsion tube F50 & F50 / Aux venturi 3.5 & 4.5
Venturi 23 & 24 / idle jet 0.45 & 0.45
Unless you change the venturi sizes I think that this may not be satisfactory.
Good Luck.
The first number is for the primary and the second number for the secondary.
Capri 28/36 DCD 38 / mains 1.40 & 1.55 / air correction 2.30 & 1.80 / emulsion tube F30 & F30 / Aux venturi 4.5 & 4.5
Venturi 26 & 27 / idle jet 0.55 & 0.70
Escort 32 DGAV 6C / mains 1.15 & 1.20 / air correction 1.60 & 1.20 / emulsion tube F50 & F50 / Aux venturi 3.5 & 4.5
Venturi 23 & 24 / idle jet 0.45 & 0.45
Unless you change the venturi sizes I think that this may not be satisfactory.
Good Luck.
-
- Oil Stain
- Posts: 151
- Joined: Sun Feb 21, 2010 10:28 am
- What model do you have?: 2275cc B BUGGY
- Location: Vaal triangle
- Has thanked: 1 time
- Been thanked: 7 times
Re: Weber 36 dcd jetting
Hi Morne
Here is some base line sizes you will just have to compensate with air correctors for youre sea level or go up in 0.5 increments in every main jet until sorted.
Chokes 23/24
Mains 110/125
Idle 45
Emulsion F23/30
Air 190/180
Here is some base line sizes you will just have to compensate with air correctors for youre sea level or go up in 0.5 increments in every main jet until sorted.
Chokes 23/24
Mains 110/125
Idle 45
Emulsion F23/30
Air 190/180
-
- Donor
- Posts: 4973
- Joined: Wed Sep 14, 2005 9:24 am
- What model do you have?: 77 SP
- Location: Johannesburg
- Has thanked: 4 times
- Been thanked: 98 times
- Contact:
Re: Weber 36 dcd jetting
Chev Ferenza 2500 had a 36DCD factory fitted
For what it's worth, ignorance has no limits ......