Page 1 of 5
63 DC
Posted: Sat Jan 02, 2010 6:45 pm
by lowlight
Time to put this one on the projects.
Ibought the bus a few years back in Ermelo and took it to the farm near Wartburg. Was towing it with an A frame and just hope that the cops would not bother me.

From the farm I put it on a trailer and bring it to Pmb.Where it was parked in the garage.
We built a frame to turn it on the side. and we stripped the bus for the repaires.
Re: 63 DC
Posted: Sat Jan 02, 2010 6:58 pm
by Blitzkrieg
G you have some nice toys!! What are the plans for this one?
Re: 63 DC
Posted: Sat Jan 02, 2010 7:51 pm
by dsan
you should see his place, has the ability to make a grown man weep
Re: 63 DC
Posted: Sat Jan 02, 2010 11:29 pm
by lowlight
Plan for now is to restore it but with low budget so it will take time. Will shift attention slowly from the westy to the DC
Here are some pics of the DC stripped.
DC on the frame (rotiserie)

Before the bed was removed, we(Fanie) sweeped the floor.

After the bed was removed

Floor in the back of the cab under the tank was rotten and taken out

Re: 63 DC
Posted: Sun Jan 03, 2010 5:46 pm
by fig
Re: 63 DC
Posted: Sun Jan 03, 2010 8:25 pm
by Dutch_Diver
Now this project I'm really looking forward too!!!!
Re: 63 DC
Posted: Mon Jan 04, 2010 3:33 pm
by lowlight
Hi Fig that was only to get it out of the garage(waenhuis), use a proper A-frame. Those cops at Greytown are bad, fined my father driving my Isuzu (+-95 model) with those other kind of light switch knobbies in the dash because he didnt know where to switch the lights on.
Re: 63 DC
Posted: Mon Jan 04, 2010 9:24 pm
by fig
I figured as much; was just poking fun.

Re: 63 DC
Posted: Mon Jan 04, 2010 10:39 pm
by lowlight
Re: 63 DC
Posted: Wed Jan 13, 2010 8:02 pm
by lowlight
Still looking for bay window floor to fit behind the back seat under the loading bin.
Re: 63 DC
Posted: Thu Jan 14, 2010 2:52 pm
by dsan
There is a bay window here in durbs at one of the scrap yards. I'll pop down there on saturday when i get home and have a look for you
Re: 63 DC
Posted: Thu Jan 14, 2010 10:03 pm
by lowlight
Thanks. 2 leads in Pmb to follow up. In Pta at the moment.
Re: 63 DC
Posted: Thu Jan 14, 2010 10:59 pm
by Chris
Spek to Bugger about a Bay that is for sale by him.
Re: 63 DC
Posted: Sat Feb 13, 2010 11:29 pm
by lowlight
While I am waiting for the panelbeater to finish with the Westy Idecide to start working in the DC. Today I started to kleen the underside of the DC, the section between the engine bay and the rear tortion bar
Should I paint NS1(rust buster) and then NS4(red oxide primer) or directly NS4 and then proper black paint 2K ?
Blits no photos yet I was to dirty to use the camera.
Re: 63 DC
Posted: Mon Feb 15, 2010 12:33 pm
by flatfourfan
Nice to see that she's getting some work done.............been a while since I saw any movement on the DC front.