Page 26 of 55
Re: My type 1 turbo project
Posted: Fri Jul 04, 2008 4:11 pm
by 4agedub
The stance with the 15" wheels is unbelievable!!!!!!!!!!! I love this car!
Thanks
Re: My type 1 turbo project
Posted: Sun Jul 13, 2008 6:02 pm
by 4agedub
Tomorrow is the big day. She'll go onto the dyno again. I've got my jungle juice in the tank

110 octane home brew.
I'll post some results as soon as she is done.
Re: My type 1 turbo project
Posted: Mon Jul 14, 2008 8:44 am
by flatfourfan
So how we doing on this?
I just the video's now....................do you have stock ratio's on the box, cause man it sounds quick.
Re: My type 1 turbo project
Posted: Mon Jul 14, 2008 9:20 am
by 4agedub
It is a std ratio gearbox. I think 4.37 diff ratio. She does not feel too bad, but I want more (add evil grin smiley here)
It all depends on how busy we are on the dyno, if it calms down after 5 I'll go collect her from home and do the dyno quickly.
Re: My type 1 turbo project
Posted: Wed Jul 16, 2008 7:32 am
by 4agedub
I had her on the dyno last night. Made 125kw @ 5000rpm (0.8 bar boost) The power falls off past 5000rpm

. I def need to change the cam.
Drove her home last night and she does not feel too bad. 3rd and 4th gear feels really nice. I think the wheel alighnment might be out a tad as the feels really loose at high speed.
After a lot of consideration I have decided to take my red beetle to historics. I've got a 1914cc engine at home for her. As for the turbo engine.... I've got a new project for her.

Re: My type 1 turbo project
Posted: Wed Jul 16, 2008 7:43 am
by 4agedub
IMAGE_453.JPG
Fiberglass body shell. Chopped roof, split window, no rain gutters and ultra light. Full interior panels

Ivan and Garin at Volkspares made this monster for me. She's going to be awesome.

Re: My type 1 turbo project
Posted: Wed Jul 16, 2008 7:44 am
by flatfourfan
Niiiiiiiiiiiiiice, I like your style..............
Re: My type 1 turbo project
Posted: Wed Jul 16, 2008 7:57 am
by Tony Z
bloody ell.... all that work getting it going, now you decide to change cam and change car... brave man.
Like your ideas tho
Re: My type 1 turbo project
Posted: Wed Jul 16, 2008 8:19 am
by 4agedub
bloody ell.... all that work getting it going, now you decide to change cam and change car... brave man.
My wife drives me to it.

Re: My type 1 turbo project
Posted: Thu Jul 17, 2008 7:31 am
by 4agedub
This weekend is wheel alignment time and next weekend.... ultimate street car challenge.
http://www.ultimatecar.co.za
I cannot wait.
Re: My type 1 turbo project
Posted: Thu Jul 17, 2008 8:50 am
by Blitzkrieg
You're going to be participating?!
Your Beetle really is going to surprise many of the competitors!!
Re: My type 1 turbo project
Posted: Thu Jul 17, 2008 10:23 am
by 4agedub
I'm going to try get all my stuff sorted. Just hope that they'll let me race.
Re: My type 1 turbo project
Posted: Thu Jul 17, 2008 7:48 pm
by Tony Z
hey 4age
you said you made 125kW. Was that at the flywheel or tyres? How much power did the gbox consume?
Just thinking about it.... are you sure its not your turbo thats too small?
Re: My type 1 turbo project
Posted: Fri Jul 18, 2008 7:41 am
by 4agedub
It is making 125kw at the wheels.
Engine kw is + - 150kw at our altitude. Engine kw at the reef comes out to + - 174kw. This is at 0.8bar boost.
I'm sure that the turbo is not too small. It is a t3/t4. T04b compressor V Trim with a stage 3 .48 exhaust housing. The turbo is capable of 400+ hp.
The camshaft is a engle tcs-20. After 5000rpm it just looses power. At 5500rpm the power goes down to 120kw and 6000rpm 118kw. This is typical behaviour of the tcs-20 cam. Also the turbo starts performing really good at about 4000rpm. So that only leaves 2000rpm. I need more RPM !!!
Re: My type 1 turbo project
Posted: Fri Jul 18, 2008 10:57 am
by dubster
yeah i was wondering when you were gonna compete...and it does sound like you have to shift very quickly when you give it,but this is an awsome car,hopefully the put a nice pic of the car in action in the speed and sound...
